Comments on Escape Games 24: Sphere Core

Orangemocafrapachino?

2008-02-14T15:49:37.239+01:00

Orangemocafrapachino?

Oh I got it, anyone looking for the glass should l...

2008-02-14T15:48:25.710+01:00

Oh I got it, anyone looking for the glass should look under the floorboards more closely :)

oh wait...the walkthrough says to drag a glass to ...

2007-11-18T10:29:23.349+01:00

oh wait...the walkthrough says to drag a glass to the kettle...where the heck is a glass?!!

no matter how much i drag the kettle (with steam c...

2007-11-18T10:25:21.302+01:00

no matter how much i drag the kettle (with steam coming out of it, i cant get it to go into the enertron. what am i doing wrong?

thanks for the walkthrough

2007-11-03T23:37:04.023+01:00

thanks for the walkthrough

hii put the screwdriver on the panel but nothing h...

2007-11-03T18:09:55.021+01:00

hi
i put the screwdriver on the panel but nothing happen.
How did you unscrew the panel ?

put the blue canister(that you made with the embry...

2007-10-22T22:14:32.534+02:00

put the blue canister(that you made with the embryo) on the swivel seat...put orange canister (made with hot water) in the sphere... then fire the blue laser out of it's mouth. The canister on the swivel is now white and glowing. Put it in the sphere and the floor opens!

it seems to me that the symbols somewhat look like...

2007-10-22T22:01:10.578+02:00

it seems to me that the symbols somewhat look like the numbers. the strange W one looks like a 4, the G looks similar to 5, and the one that DOES look like 3, well looks like 3.

Shanzak keep at it just use around the middle of t...

2007-10-18T00:05:23.601+02:00

Shanzak keep at it just use around the middle of the screwdriver over the bolts and the metal plate will fall off, I had the same trouble as you but it finally worked.

I am totally confused (nothing new there then lol)...

2007-10-18T00:03:06.822+02:00

I am totally confused (nothing new there then lol) were it says:

16. Repeat the above process with the glass of hot water and the second power core to create the Hot Power Core.

I have tried that but its not allowing the second power core in the enertron for some reason, I got the first one done by using the frozen embryo and the first power core and that worked what am I doing wrong?

i cant get the screw driver to work i've used the ...

2007-10-17T23:57:12.380+02:00

i cant get the screw driver to work i've used the middle part but it still doesnt work

Thanks for your help

2007-10-17T23:15:42.597+02:00

Thanks for your help

If u put the kettle bac on where u got it from it ...

2007-10-17T22:29:57.387+02:00

If u put the kettle bac on where u got it from it will boil and you'll know it's full

about the ting on the wall if u rite click on ur m...

2007-10-17T22:28:51.034+02:00

about the ting on the wall if u rite click on ur mouse on it and press zoom in you'll see that there are 4 screws I tink dats y it's not openin.
If anyone needs help wit anything just let me know I'm out

you dont use the tip of screwdriver you use the mi...

2007-10-17T02:41:37.487+02:00

you dont use the tip of screwdriver you use the middle of it and put the kettle on the area and if steam is coming out you know its full

Me to cannot get the scewdriver to open the metal ...

2007-10-17T00:28:56.129+02:00

Me to cannot get the scewdriver to open the metal piece on the wall and how can yoy tell if the kettle filled with water its impossible?

The screwdriver isn't working for me. How do I un...

2007-10-17T00:06:18.495+02:00

The screwdriver isn't working for me. How do I unscrew the metal plate?

SPHERE CORE WALKTHROUGH1. On starting the game, cl...

2007-10-16T19:35:24.240+02:00

SPHERE CORE WALKTHROUGH

1. On starting the game, click towards the bottom of the screen (just above the inventory) to look down at the floor. Remove the floorboards and collect the screwdriver and the glass. The starting screen will be referred to as "North".

2. Go to the west wall and collect the kettle from the table.

3. Also collect the tile with part of the circuit board on from the right enertron alcove.

4. Go to the south screen. Open the cupboard door and remove the wooden tile containing the second part of the circuit board.

5. Drag the kettle from the inventory to the sink, in order to fill the kettle.

6. Use the screwdriver on the four screws around the metal plate on the wall, to remove it. When it falls off, collect the two power cores and the remote from inside.

7. There is a piece of wallpaper just above the sink which can be clicked on. Doing so will reveal the code to the Cryo Unit (534).

8. Just above and to the left of the sink is a tile which can be clicked. This is the final piece of circuit board.

9. Click on the Cryo Unit, and enter the code (534). The numbers ARE in english, they are just heavily modified (perhaps the digits 3 and 4 are the most recognisable, the rest are 1, 2 and 5, it should be simple to work out which is which as they are in order).

10. Remove the frozen embryo from the cryo unit.

11. Go to the east screen. Drag each of the tiles collected so far onto the tile rack on the right of the screen, in order to reveal the pieces of the puzzle.

12. Drag the puzzle pieces from their rack onto the circuit board. When a piece is dragged onto a part of the puzzle, it will lock in place until the power button is pressed. If you make a mistake, just press the power button and it will release the pieces so they can be corrected. When the puzzle is correctly assembled, press the power button to activate the power to the magnetic coils under the sphere.

13. Go back to the Enertron (west). Drag the kettle back to it's stand in order to boil the water.

14. Drag the glass onto the kettle to create a glass of hot water.

15. Drag the embryo from the Inventory onto the left alcove of the enertron. Drag the first power core to the right alcove. Hit the power button to create the Ice Power Core. Remove the power core and embryo from the enertron.

16. Repeat the above process with the glass of hot water and the second power core to create the Hot Power Core.

17. Go back to the Sphere.

18. Click the remote button in the inventory to make the sphere remote visible on the screen.

19. Click button 1 (same symbols from the cryo unit) to open the Sphere Iris.

20. Drag the Ice Power Core into the hole and close the iris again.

21. Press button 2 to cause the sphere to levitate, and lower it's legs.

22. Press button 3 to activate the Head. This is as far as you can get using the Ice Core. The Sphere needs more power to move onto the next stage.

23. Remove the Ice Power Core and replace it with the Hot Power Core. The machine will still not activate it's the 4th button until it's target is ready:

24. Go to the south screen, and click on the large screw in the floor until it is at it's highest setting. Drag the Ice Power Core ontop of the screw.

25. Go back to the north and press button 4. A beam of energy should be fired by the head, and strike the Ice Power Core, converting it into the Super Power Core. Click on it to collect it.

26. Go back to the north screen, remove the Hot Power Core, and insert the Super Power Core.

27. Press button 5 on the remote. The Sphere should open, and begin charging up for it's final ability.

28. After a short animation, the sphere will vanish, taking with it part of the room, leaving a hole in the wall. Click on the hole to Escape.

help please, where is the smoking canister? Thanks...

2007-10-16T14:57:59.777+02:00

help please, where is the smoking canister? Thanks

I just can't find any fetus in this game... Where ...

2007-10-16T13:56:17.935+02:00

I just can't find any fetus in this game... Where did you find it? Please, be specific, because I've been clicking madly, without any result... Thanks!!!

can anyone tell me where the white tile is, i foun...

2007-10-16T12:52:22.568+02:00

can anyone tell me where the white tile is, i found it before but the game has a glitch with the enertron so i had to restart but i can find it now

I DID IT¡¡¡ IT TOOK ME A LONG TIME, BUT I DID IT. ...

2007-10-16T11:51:54.604+02:00

I DID IT¡¡¡ IT TOOK ME A LONG TIME, BUT I DID IT. TANKS ALL OF YOU¡¡¡¡¡ I`M OUT¡¡¡

some body PLEASE help me get the canister that is ...

2007-10-16T11:27:57.007+02:00

some body PLEASE help me get the canister that is under the panel you unscrew OPEN PLEASE!!

cat it is in the electron

2007-10-16T11:16:19.082+02:00

cat it is in the electron

click under the blue rings on the floorboards at t...

2007-10-16T11:08:13.734+02:00

click under the blue rings on the floorboards at the view of the eyeball/camera thing, click the middle of the screen until the floorboards disappear and screwdriver and glass are there.