2012 Escape - Nuclear Base
2012 Escape - Nuclear Base is a new point and click type escape the room game from CafeCafeGames and JuegosDeEscape.Net. The end of the world is comming and you are trapped in this nuclear base. Try to escape by finding objects and clues. Good luck and have fun!Play This Game
If you find any broken link about this game, please report and let us know by contacting us. We will add working link if there is any alternative. You may also report any game bugs or problems about games directly to developers from their websites.
55 comments:
red pin, bottom of first screen
PIN bottom right start screen (door), for printer left of PC
- number on printed paper for BOX
hi, nokra,
hopefully a bit easier than Escatrix 2... (at least for me LOL)
- green key from number box, used for MICROCHIP
green key from 4 digit box
- microchip goes left of door
Yeah .. a live one
Hi @premiere!
we need another chip...
Hi all!
- click order for 6 square buttons from machine left of PC
COLOURS
Dots:
lG-dR-O-G-Y-R
Squares:
G
lG
Y
O
R
dR
sd from levers..the test tubes as clue?..kinda bf'ed it, not sure
Color code turns the light off but I don't see why.
- use SD on CPU panel for 2nd chip for left of door
- gives blue key, used for FINGER, eeew LOL!
- fingerprint for yellow key (left of tubes, which ARE hint for levers ☺)
- key used for gloves, used for red key in barrel, used for CARD
- card used on door hole & OUT!
Anyone else, too?
;-D
nokra - help on the levers please? I don't get it!
I tried 1-6 premiere...what is order please?
Oh, POP..I had it the other way around!!! lol
click 513642...I was clicking 263514...lolol
- for lever hint (tubes), look how much the first 4 are filled with fluid
Thanks premiere.
Yes, out...but still don't get what the color code did....
Sorry, yoli...I think it was the purple test tubes...
now game closed...lol
LEVERS:
SPOMILERSPOBILERSPOTILERSPOMILER
Nokra,
it turned power off of PC, that you can open CPU panel with SD.
☺
Square buttons click order:
SPOI5LERSPO1ILERSPO3ILERS6POILE4RSPOI2LER
I don't get the levers/test tubes...
I see half, full, empty, half
To me, it should be M, T, B, M
so why is it M,B,T,M?????
ok ..I have SD .. and saw color code clues ..but for the live of me I must be blind because I can't find where to use them ...
pmisty...use them in screen to the left, there are 6 grey buttons you can press on a machine at left
I agree nokra mine was the same way .. I just reversed the middle two to brute force it ..
I keep timing out here when I post, but refresh does make my comment post!
Yep, nokra,
I realised that, too...
seems to be the special logic of the gamemakers...!
;-D
Or:
How much place is left for more fluid
- 2nd tube no more, so lever B
- 3rd tube whole tube, so lever T
Ok I see the machine with the six buttons .. but mine do not change to these colors. They are all a teal blue which changes to purple only for a second when clicked .. am I at the right place ..is there a number of clicks for each button ... confused
i think im not late for the live game ....
Pmisty,
the buttons don't change colour. At colour machine, the colours are numbered (vertically), order is horizontally:
lG-dR-O-etc.
5-1-3-etc.
☺
Pmisty,
so click at square button machine the order from colours with numbers (5th-1st-3rd etc. button)
Arrrg ..duh ..must not have enough caffeine in me .. I SEE it now ... thanks Premiere
what do u use pin 4?
LOL, Pmisty,
I also know by experience, that I quite often overlook the obvious...!
☻
britney,
pin goes on printer left of PC screen (zoom)
And out .. went smooth after the color code .. thanks again Premiere :)
No guys, I think the levers came from the EEG, mid low high mid, on the printer machine after you use the pin on it.
Natch, Arike!
Didn't think of that one anymore...!
Thx!
☺
pin goes on printer which give hint for lever
.
middle ,lower ,upper ,middle
no# code from print
12i4
sqaures oder to push are
5,1,3,6,4,2
My square order does not work... I can't use SD on PC (it's the one next to monitor, right?)...
Bug?
Jon D.
you must first turn power for CPU (right of monitor) OFF with the square button machine, before you can use SD on the panel...
Click square buttons (each one time) as follows:
fifth-first-third-sixth-fourth-second
If you pressed a wrong button, leave the view & come back to restart the sequence.
i CANNOT get the 6 square buttons to work. I have tried a dozen times I know the order 5-1-3-6-4-2. AAARGH
tikitty - I can't get it to work either. I figured out the order by myself, confirmed it by reading these comments, even restarted and it still won't work.
Glitchy pixely, weird logic but enjoyable.
Aaargh spent ages trying to use the card in the slot thing beside the door ... instead of on the door itself.
Thanks to all for help, would never have got those buttons on my own!
Bit on the easy side, but despite of that a very nice game. I liked it!
this is NOT easy! color code does not work, computer does not shut off and so can't use screw driver and have restarted it twice.
this game sucks! Bye
the buttons don't work for me either. I have pushed them in the correct order several times. Very frustrating!
boring game, as usual from these makers
i have got all codes by myself but nothing is workingon the color code grrrr
Subscribe and get daily new escape games by email.