[REPLAY] Gasakism - The Scarlet Room Escape: Episode 2 is another point and click room escape game developed by Gasakism. In this game, you are in a room that everything is red and there is a body on a bed. You have to escape the room by searching the room to find items and solving puzzles. Good luck and have fun!Play The Scarlet Room Escape 2
The Scarlet Room Escape 2 Walkthrough
348 Comments
OK.. for anyone who isnt clear.
ReplyDeleteTo solve the grid/bottom red hand gauge puzzle:
Insert the prime-numbers that were left on the tree picture according to order in the list of prime numbers just like you did with the cloud puzzles!
Ah thanks adam!
ReplyDeletehow do I get oxygen connector?
ReplyDeletehow do I get oxygen connector?
ReplyDeletejust use the wrench on it jessica
ReplyDeletemy number was 2589
ReplyDeleteuse the wrench to take it off
ReplyDeleteOK.
ReplyDeleteBoth circle gauges are up.
Still can't use the red lever to turn the machine on.
Forced paper back under the door.
Still have: Red lens, Wrench, Oxygen Mask, Oxygen COnnector
Right now I have the mask and connector just hooked up to one of the tanks, but they will connect to either one.
*******Something new: Not sure if anyone else noticed this...but on the picture with the bouncing ball and hexagons,there seems to be a MOON in the corner, and some sort of TUBING going through the hexagons. Whats up with this?
i just removed the mask bit of the oxygen mask with the wrench
ReplyDeleteHow did you push paper back?
ReplyDeletelittle greys now connect the tube to the bottom of the panel, onto that little yellow part
ReplyDeleteALSO NEW:
ReplyDeleteHover your mouse over the screws on that metal plate with the two brown pipes coming out (above the grid/gauges/etc.) Notice how the mouse pointer turns into the grabbing hand. SOmething is up here!
then turn the oxygen knob to get the last gauge in the red
ReplyDeleteYes, I have noticed that too, but don't know what to do with it.
ReplyDeleteuh, totally cant figure out what to do next
ReplyDeletewait.. the bottom part of the panel?,.. what panel?
ReplyDeleteAdam, just click on that piece of paper and drag it to the space between the door and the floor
ReplyDeleteOk have paper dolls from under door and yet another code behind the picture
ReplyDeleteSilly question but how do I view the numbers on the broken lamp under the table? If I use the lens I dont see any and if I zoom in I can't use the lens. What am I doing wrong?
ReplyDeletethe panel with all the gauges and the grid. there is a little yellow knob on the bottom of it.
ReplyDeletehow stupid I feel
ReplyDeleteSerran... back up. What did you do after you solved both little grids and got the gauges up? And pushed the letter back under the door?
ReplyDeleteUse the lens without zooming in.
ReplyDeletei see that little yellowish peach semicircle.. but I cant attach anything to it..
ReplyDeleteonce you take the mask off of the oxygen tube you can connect it between the tank and the little yellow knob on the bottom of the panel. when you turn on the oxygen tank the last gauge goes up. then pull the lever.
ReplyDeletewait.. first.. which tank? Left or right? Then, how do you attach it to the yellow thing?
ReplyDeletewhat connects directly to what? I've tried everything..
now the picture fell off and there is a new weird looking code on the wall
ReplyDeleteMy brain hurts, I don't even know where to start with this new code.
ReplyDeleteConnect the mask to the yellow thing under the panel? It isn't working for me.
ReplyDeleteserran all it says is it doesn't work?
ReplyDeleteYOU HAVE TO USE THE WRENCH ON THE MASK TO TAKE THE FACE PIECE OFF!!!
ReplyDeletechelsea I'm stuck right with you
ReplyDeleteThx Adam...I thought they were a lot larger...lol
ReplyDeleteChelsea, use the wrench on the oxygen mask to take it off. Then connect the valve and the tube to the tank on the left (the other may work, that's just the one I used) From there connect the other end of the tube to the little yellow knob
ReplyDeletethanks chelsea that totally works!!
ReplyDeleteattach the o2 mask/tubing to left o2 tank then use wrench on mask part when it is laying on stretcher
ReplyDeleteuse the oxygen tank on the left (next to the wall), connect the air connector then the hose after that if you click on the hose you can drag the end bit to the yellow part at the bottom of the panel. once you've done that, click the nob on top of the oxygen tank
ReplyDeletepulling levers works now, and there goes picture from wall
ReplyDeleteOH!!!! Put the gauge on the left tank, connect the hose to it. Take the mask of the hose with the wrench and then connect it to the panel. Then turn on the oxygen.
ReplyDeleteDo you guys all have a hexagon with 5 pie pieces that have shapes and one that has little hexagons again? (24) Also.. the shapes light up.. but the last pie piece does not.
ReplyDeleteOMG ALSO. Look back at the note! It says Hexagon = KEY now!
ReplyDeleteWhat hexagons?
ReplyDeletetried to look for shapes in the hexagons on the pic with the lens, and nothing. ugh, i will finish this game tonight!
ReplyDeletechelsea I have same but how do you get key from that?
ReplyDeleteok.. go look at the note on the messy table again. It used to say Hexagon = 1.. now it is different!
ReplyDeleteoh ok
ReplyDeletethe 24th prime number is 89 if that makes any difference
ReplyDeleteLooks the same to me.
ReplyDeletegot key....light up the left and right symbols and look at it with the red disk
ReplyDeleteAdam. Did you look at the note before all the gridwork? It used to say hexagon=1.. or at least we all thought thats what it said.
ReplyDeleteI noted the same thing about 89 being the 24th prime number.. but i dont see how that connects. We are all missing something.. there has to be a 5th object. And i still think there is something about those Screws!!
adam, did you click on the picture on the wall? it'll fall down and reveal the hexagon
ReplyDeleteFound them!
ReplyDelete@Adam, six equal sided 'squares'
ReplyDeleteI hadn't pulled the switched, but I thought I had. I see the key and the hexagons now.
ReplyDeleteso much for getting a key....doorknob fell off
ReplyDeleteI got a key...
ReplyDeletewait.. light up left and right symbols... which are left and right?
ReplyDeletelight up the circle and the x on the hexagon
ReplyDeleteI lit the left and right symbols and looked at it with the lens. All I see is a big red circle on top of it now. Where is the key?
ReplyDeletego back and look at the note, you'll see two little dots on the hexagon, just click the corresponding corner
ReplyDeleteMy doorknob feel off too! Must restart?
ReplyDeleteI got the key right after the post i just set.. I lit them all and looked at it with the red lens.. then used key on door.. and the doorknob fell out!
ReplyDeleteBLOODY PAPERDOLLS!
ReplyDeleteThanks Chelsea! I had to light all of mine as well.
ReplyDeletedrag the red lens on the hexagon when you are NOT zoom in and let go(just like it was with the clouds). if you click the two correct sections, you'll see the key
ReplyDeletenow i have a paper chain under door but it's bloody and missing heads...by the way has anyone noticed the devils head on the wall by hexagon matches the key?
ReplyDeleteI lit the square and the upside down triangle for my key
ReplyDeleteOh, put key in bloody paper doll hole, but you jump out of window and die. Is there another ending? I hope because this one is horrible.
ReplyDeleteAlso,,,this has been there... but if you look at the cluster of hexagons on the wall by the door through the lens,, you see the devil face!
ReplyDeletei got bloody paper dolls missing heads too
ReplyDeleteout...put the key on the hole of the bloody paper dolls
ReplyDeletemy ending was the door opened and the wrench hit the shadow at the door then "the end"
ReplyDeletethat was a pretty gruesome ending at least I got to bash the guys head with the wrench
ReplyDeleteYikes! What an awful ending!
ReplyDeletemaggie keep going through the words, I thought the same too at first
ReplyDeleteWell it was fun playing. Thanks for the help everyone. Goodnight, it's pretty late here.
ReplyDeleteewww...all that work for a gruesome end....blech
ReplyDeleteIs this game still live? I am stuck!
ReplyDeletewait.. really? I tried that adam.. but nothing happened.. did you actually die?
ReplyDeleteThank you very much for the help everyone. I knew that picture with the moving ball seemed familiar. The end room was from an escape game posted months ago...
ReplyDeletethank you all for your very much need help! I got out but I died too, sucky ending
ReplyDeleteI dont think that's the end...when i was still stuck in the room, i noticed there is a little rectangle in the middle of the tree (the picture), i wonder if it has something to do with actually escaping???
ReplyDelete*needed
ReplyDeleteI got out and then hit the guy with my wrench. Then I ended up in another room looking out a window with the same moon and bouncing ball. Then I saw someone else jump out the window and pierce himself on a rock structure below. Ouch!
ReplyDeleteI don't think we are the person who died though.. I watched someone else jump out the window..
ReplyDeleteI wonder if we are interpreting the ending differently.. or maybe it has to do with how much time it took you to complete the game..?
ReplyDeleteit looked like the guy was running to the window and jumped out to me
ReplyDeleteI actually was moved to another room. Then my guy said "what the... that's the room I was being held in"... or something like that... then he looked out the window.. and saw someone jumping.. or at least thats how I took it..I think it it was "me" I would have seen it through my eyes.. like the rest of the game.,
ReplyDeletethis game is a continuation of a previous game where the guy was locked in that other room
ReplyDeleteWalkthrough
ReplyDelete1. Go left twice till you see the picture with a tree in it.
2. Click on it and notice the four numbers on the end of the roots and their order.
3. Take their square roots. (ie 4=2, 9=3, 16=4 etc.)
4. Go back right twice and notice the colors that match the numbers.
5. Click on glowing alien at the head of the hospital bed.
6. Click the four feet to match the colors that match the square roots of the tree.
6. Click the alien's arm and then head. (There will be a split scene with information.)
7. Go right once and click on clock and click on one of the buttons.
8. Click on the red object that replaced the clock. You now have a LENS.
9. Use the LENS to see what numbers you have in the clouds of the tree picture.
10. Go left once to a window with a dot moving around.
11. Use the LENS on one of the clouds and unclick to release.
12. Click on the two dots until you have as many dots as the prime number is in order with it's matching cloud. (ie 2=1, 3=2, 5=3, 7=4, 11=5, 13=6 etc.)
13. Repeat with the other two clouds step 11 and 12.
14. There will be a WRENCH that will be dropped from the window. Pick it up.
15. Go left once.
16. Click on hose by air tanks to zoom in.
17. Click on HOSE MASK to pick it up and go back.
18. Click on gauge on air tank to zoom on it.
19. Click on GAUGE with WRENCH to pick it up and go back.
20. Put GAUGE on left air tank.
21. Put HOSE MASK on GAUGE.
22. Use WRENCH on HOSE MASK to take off the MASK.
23. Connect HOSE to the bottom of the control panel.
24. Turn air tank on. (Split scene will show a gauge going up.)
25. Go back.
26. Hit green part of operation light with WRENCH 6 times. It will fall.
27. Go right.
28. Use LENS on fallen light to see four numbers.
29. Go back left. *Warning a demon face will appear*
30. Click the numbers on control panel. Another gauge will go up.
31. Go back.
32. Now go left twice to the picture of the tree.
33. Use LENS to see the last six prime numbers.
34. Go back right twice.
35. Click the six buttons on the grid that corrosponds with the ording of the prime numbers. (Again 2=1 3=2 5=3 7=4 11=5 13=6 ect.) Last gauge will go up.
36. Go back.
37. Go left twice.
38. Put paper that was slip under the boor back under the door.
39. Go back right twice.
40. Pull down lever.
41. Go back left twice.
42. Look at paper doll and go back.
43. Click on picture to drop.
44. Click on red hexagon to zoom in.
45. Click on all symbols to glow.
46. Go back.
47. Use LENS to see KEY and zoom in.
48. Grab KEY.
49. Click back.
50. Use KEY to "open" door, but knob falls off.
51. Circle room.
52. Click on bloody paper dolls slipped under the door.
53. Put KEY in the hole of one of the paper dolls.
54. Go back. Split scene will open door. You are out. *Warning Ending isn't pleasant.*
I hope you liked my first walkthrough.
Is this really the end. This is what my screen showed at the end of my second run.
ReplyDeleteEscape attempts: 2455
Successful: 0.04%
After my first run through it showed as 0.06%!!!!!!
Unfortunately it is.
ReplyDeleteI can't seem to figure out the freaking cloud pattern thing. I've got 101@26 dots, 67@19 dots and 137@33 dots. is something supposed to happen when you get that right? or am i missing a click?
ReplyDeleteI think we clonked our earlier selves over the head with the wrench. Think about it. First we get a blank piece of paper (like the blank paper game 1 pushes through) and we send it back blank (game 1 receives it back, blank). Game 1 sends it back as paper dolls. We, game 2 receive it as paper dolls. We shove it back again. Game 1 gets paper dolls back. Game one puts the dolls back under and puts the stylus in (presumably that's really what knocks the knob off). We, in game 2, put the key in the hole in the bloody paper dolls, just like how game 1 receives it. Then game 1 walks through the door, and we, game 2, knock em out!
ReplyDeleteThat's not a nice ending. I'm disturbed by it...not cool.
ReplyDeletei don't even have the paper anymore...what now? i got the second gauge to go to red but have run out of ideas...
ReplyDeletenevermind...in the time it took the post to go thru, i finished the game
ReplyDeletewell...it's 6 am here, and i stayed up all night playing this game...time to sleep. night, all!
ReplyDeletevery gruesome and weird game.puzzles were different but game toooooo weird
ReplyDeleteand thats "me" that dies in the end."i" get too fed up with the whole thing so just escape through window......
adam; thanks for the walkthrough... It was really helpful...
ReplyDeleteim in the same place with you guys... anyone gotten any further
ReplyDeleteI am stuck :o( I can't see any numbers on the fallen light fitting, either in the view where it scrolls right, or by actually turning right. I hold the red lens over it, and there are no numbers. If I zoom in on the lamp, I then can't use the lens. No-one else had this problem? I have done the other two guages, but can't see the numbers I need for the third :o(
ReplyDeleteim stuck is anyone still here
ReplyDeleteAfter you have the wrench you can break one of the lights which falls to the floor then zoom in and use this number on cloured key pad.Next take pipe attachment from cylnder 2 and attach to number 1 then attach pipe.Then use wrench on end of pipe to break off mask.Now attach pipe to an outlet at bottom of green light grid.Now turn on left hand oxygen cyclnder tap and pull lever on machine.
ReplyDeleteNext zoom in on hexagon and press all shapes then zoom out and use lense in front of hexagon.Get key -try key in door - handle breaks - dont worry pick up paper dolls again under door and put key in paper key hole.Thats it - but silly ending after all that hard work.
hi guys,
ReplyDeletewell, after i entered the 4digits the second gauge moved and now suddenly Im able to interact with the screws on the pipes above the gauges!!! so we DO need a damn screwdriver here! who would have guessed that?! actually i dont wanna ask but WHERE IS THE SCREWDRIVER????
Let me clarify...
ReplyDeleteI have already broken the light, it is on the floor. But I can't see any numbers on it, no matter how I look. Please could someone give me a detail explanation of how to see them?
(I have already done the oxygen tank guage, I just need the third, and final, one from the fallen lamp...no hexagon for me until I can see those damned numbers! Lol)
Divinyl, close the text box at the bottom of the screen and you should be able to see the number.
ReplyDeleteHint, write it down then turn it upside down.
Linda, it's a red herring. You DON'T need a screwdiver.
ReplyDeleteSPOILER!!
ReplyDeleteAttatch the grey regulator to the other oxy tank, attatch the tube then remove the mask with the wrench. attatch the tube to the yellow part of the machine on the wall and turn on the switch.
darn! It took me so long to get signed in I couldn't help! :-)
ReplyDeleteThanks Rambler10, but there is no text box. I have tried looking at the lamp, not zoomed in, throught the red lens, on both screens where it can be seen under the table. I hnave also tried zooming in on it from both scenes (then the red lens won't work). Nothing :o(
ReplyDeleteThink I might just give up :o(
@divinyl the numbers are wriitten in red approx.on the bottom right area of lamp.check it with red lens in normal view(with window view).
ReplyDeleteit was vry difficult for me to understand the numbers too. try to adjust the brightnes or contrast also. hope it helps:)
Hi, I been doing exactly what everyone says to do with the grid and i have checked to make sure the numbers are right like a millon times but my grid thing isnt working!! my numbers are: 13=6, 53=16, 67=18, 71=20, 101=26, 137=33... can someone please tell me if i messed up with something b/c im really stuck!!!
ReplyDeletehas anybody else seen the yellow semicircle behind the big grey lock wiv all the gauges and the handle on?
ReplyDeleteNew Breakthough!!!!!(for me lol)
ReplyDeleteI managed to take the mask bit off the oxygen tube and attach it to the yellow semicircle under the grey bit with the gauges on it... now im stumped...
all that to jump out a window.....>=[ i wasted a day on that....oh well time to go find anutha 1 to waste the night on! lol
ReplyDelete3. Take their square roots. (ie 4=2, 9=3, 16=4 etc.)
ReplyDelete4. Go back right twice and notice the colors that match the numbers.
Can someone just say what to click on as this reall doesnt help?
anyone playing ?
ReplyDeletehi
ReplyDeletestarting now.better late than never.lol
anyone out there?? I'm stuck!!! I have all the gauges up and nothing happens when i pull the lever. I f i try to mess with the grid, it says that i don't have to do any more with it. help anyone????
ReplyDeleteafter u connect the hose/oxygen mask & the grey thing to the left oxygen tank, use the wrench and get the mask off the hose. theres a yellow thing under the green control pannel..connect the hose to it and turn on the oxyen. with all three guages up, pull the lever. hexagons go all over the place to the pic that looks like a tree. click it and it falls off.
ReplyDeleteTHEN....after it fall. light up all the symbols, zoom back out, and put the lens over it. it makes a key....grab it.
ReplyDeleteTHENN....after u get the key, put it in the door. the handle will fall off...the doll thingy was put back under the door and is bloody now.
THENNN....take the skull key thingy, put it in the hole in the paper doll thingy, and hit back. the door opens and there is the ending.....
WARNING....frustrating ending...
everything is connected, but when i pull the level, it says "nothing happens" I checked all my gauges and the top circle on on the left is not in the red. I truned on the oxegen, is it possible it didn't turn it enough. I tried to go back and turn it again, but it doesn't let me
ReplyDeleteoh also the paper got taken away, but i didn't yet back any paper dolls
ReplyDeletei think that i didn't do the numbers on the control pad, i did the grid. How do you do the colored numbers?
ReplyDeletei'm out :( how awfully painful. I think i liked the Christmas tre one better-made me feel good.
ReplyDeleteI had fogotton to use the code from th light on the numbers, that's how come i was stuck (big DUH!)
1. Go left twice till you see the picture with a tree in it.
ReplyDelete2. Click on it and notice the four numbers on the end of the roots and their order.
3. Take their square roots. (ie 4=2, 9=3, 16=4 etc.)
4. Go back right twice and notice the colors that match the numbers.
5. Click on glowing alien at the head of the hospital bed.
6. Click the four feet to match the colors that match the square roots of the tree.
6. Click the alien’s arm and then head. (There will be a split scene with information.)
7. Go right once and click on clock and click on one of the buttons.
8. Click on the red object that replaced the clock. You now have a LENS.
9. Use the LENS to see what numbers you have in the clouds of the tree picture.
10. Go left once to a window with a dot moving around.
11. Use the LENS on one of the clouds and unclick to release.
12. Click on the two dots until you have as many dots as the prime number is in order with it’s matching cloud. (ie 2=1, 3=2, 5=3, 7=4, 11=5, 13=6 etc.)
13. Repeat with the other two clouds step 11 and 12.
14. There will be a WRENCH that will be dropped from the window. Pick it up.
15. Go left once.
16. Click on hose by air tanks to zoom in.
17. Click on HOSE MASK to pick it up and go back.
18. Click on gauge on air tank to zoom on it.
19. Click on GAUGE with WRENCH to pick it up and go back.
20. Put GAUGE on left air tank.
21. Put HOSE MASK on GAUGE.
22. Use WRENCH on HOSE MASK to take off the MASK.
23. Connect HOSE to the bottom of the control panel.
24. Turn air tank on. (Split scene will show a gauge going up.)
25. Go back.
26. Hit green part of operation light with WRENCH 6 times. It will fall.
27. Go right.
28. Use LENS on fallen light to see four numbers.
29. Go back left. *Warning a demon face will appear*
30. Click the numbers on control panel. Another gauge will go up.
31. Go back.
32. Now go left twice to the picture of the tree.
33. Use LENS to see the last six prime numbers.
34. Go back right twice.
35. Click the six buttons on the grid that corrosponds with the ording of the prime numbers. (Again 2=1 3=2 5=3 7=4 11=5 13=6 ect.) Last gauge will go up.
36. Go back.
37. Go left twice.
38. Put paper that was slip under the boor back under the door.
39. Go back right twice.
40. Pull down lever.
41. Go back left twice.
42. Look at paper doll and go back.
43. Click on picture to drop.
44. Click on red hexagon to zoom in.
45. Click on all symbols to glow.
46. Go back.
47. Use LENS to see KEY and zoom in.
48. Grab KEY.
49. Click back.
50. Use KEY to “open” door, but knob falls off.
51. Circle room.
52. Click on bloody paper dolls slipped under the door.
53. Put KEY in the hole of one of the paper dolls.
54. Go back. Split scene will open door. You are out. *Warning Ending isn’t pleasant.*
Two more things: I was able to shove the paper back under the door via the same crack it came from. I don't know what that did.
ReplyDeleteAlso, there is a hidden face of Satan above and to the left of the door which you can see with the lens. Maybe we have to do something special with that spot.
WALKTHROUGH
ReplyDelete1. Turn right twice. Zoom in on the tree painting, and make a screenshot of it for later.
2. Notice the four tree roots. Each of them has a number which is a perfect square. You need to find the square root of each number, and write them down (in order).
3. Turn right twice again. Zoom in on the colored/numbered buttons. Each of the four numbers you wrote down has a corresponding color, so write those down too (again, in order).
4. Zoom out, then zoom in on the weird creature on the bed. Its four legs are laid out in the same way as the tree roots. Click the legs to change their colors, until all four colors match the ones you wrote down. Remember, the whole room has a reddish tint, so the colors won't match exactly, but you should be able to figure out which is which.
5. When you're done, click the creature's arm. If you got any of the colors wrong, the numbers on the tree will change, so go back and check it again (remember to take a new screenshot). If all four are right, you'll get a cutscene. After that, the creature will disappear, and the room won't be tinted red anymore.
6. Turn right once. Click on the clock to zoom in on it, then click one of the buttons. The clock will change into a red lens; get it. You can drag this lens over various objects in the room to reveal hidden messages.
7. Turn left once. Notice that the three clouds in the window are the same as the ones from the tree painting. Drag the lens over one of the clouds to zoom in on it. You now have a field and 2 buttons; one of them adds 1 dot to the field, and the other adds 10 dots. You need to match the number of dots in each cloud with the number from the corresponding cloud in the painting. However, you can't actually get the number of dots to match the cloud number itself. Instead, it needs to match the ordinal.
* To explain, look at the numbers in each of the painting clouds. Notice that each one is a prime number. You need to figure out WHICH prime number in the sequence it is (the "ordinal"), then make that number of dots appear in the window cloud. For example, let's say one of the painting clouds contains the number 17. 17 is the 7th prime number, so 7 is the ordinal; hence, you need to make 7 dots appear in the window cloud. (You can go here to easily find the ordinal for each number.)
nce each of the clouds has the correct ordinal, the moving dot will create a wrench; get it.
8. Turn left once. (An image of a skull will suddenly flash on screen; no idea what it is, so ignore it.) Notice the big grid of buttons. You need to press the buttons corresponding to the remaining prime numbers from the tree picture (that is, all the numbers EXCEPT the ones from the clouds and roots). Again, use the ordinals, not the actual numbers. For example, let's say one of the remaining primes is 53; 53 is the 16th prime, so you'd press the 16th button. Once all the buttons are pressed, one of the two small dials on the console will activate.
9. Turn left once. Repeatedly use the wrench on the right-hand laser disk thingy, until it falls off. Turn right twice. Drag the red lens over the fallen disk, to reveal a 4-digit number. Turn left once, and punch those numbers into the colored buttons. This causes the second of the two small dials to activate.
10. Click near the bottom of the oxygen tanks to zoom in, then pick up the oxygen mask/tube. Zoom out. Use the wrench on the nozzle near the top of the right-hand oxygen tank, to detach it. Then use the nozzle on the left-hand tank, and attach the mask/tube to it.
11. Use the wrench on the mask to detach it from the tube, then pick up the end of the tube and drag it to the yellow nozzle under the buttons console. Finally, turn the wheel on top of the left oxygen tank, to feed oxygen into the console. This causes the large console dial to activate, which means all three dials are now activated.
12. Zoom out, and pull the lever. A trail of red lights appears on the wall. Turn left twice to follow the lights around; notice the trail ends on the tree picture. Click it to make it fall off the wall, revealing a hexagon behind it. Click the hexagon to zoom in on it, then click each of the five symbols to make them light up. Then zoom out, and drag the red lens over the hexagon, to reveal a skull-shaped key; get it.
13. Use the skull key on the main door, and the doorknob will fall off.
14. Click the paper dolls under the door to zoom in on them; then zoom out, and the dolls will be gone.
15. Turn all the way around (click any direction 4 times), and the dolls will be back, but now covered in blood. Zoom in on them, and notice that one of the dolls has a hole in it. Use the skull key on it, then zoom out.
16. You're out!!! Now watch the (really weird) ending.
Goog Luck @ All!
Add the nozel and hose to the left air tank and then plug the other end of the hose into the little bump at the bottom of the control station. You have to use the wrench to move the nozel as well as remove the mask from the hose to do this.
ReplyDeleteYou can put the paper back under the door. Where is the dang screwdriver to open the vent?
ReplyDeleteWALKTHROUGH:
ReplyDeletego to picture with tree and clouds. Note the numbers on the bottom of the "roots." Take the square root of those numbers and look at the corresponding colors on the big machine.
Square Root List
81 = 9 = white
64 = 8 = light bluw
49 = 7 = purple
36 = 6 = dark blue
25 = 5 = green
16 = 4 = yellow
9 = 3 = orange
4 = 2 = red
click on the colored circles one the alien's feet to change them to match up with the numbers/colors of the tree picture. then click on the alien's "arm." it'll flash and you'll get a scene about hexagons and prime numbers. once that is over, the red haze over the room will be gone.
click by the oxygen tanks and pick up the hose and mask.
go over to the tree picture and click on the clock. click on one of the buttons and wait for the clock to turn red. click on it and pick up the "lens." use the lens over the tree picture and take note of the numbers in the clouds (and also the placement of the clouds). using the internet, look up the full list of prime numbers. find the placement of the numbers in the clouds (ex. 2 would be the first number, 2 would be the second, 5 would be the third, etc.) here's a helpful link: http://en.wikipedia.org/wiki/List_of_prime_numbers
go to the picture with the moving ball. click and drag the lens over one of the dark clouds and let go. it will zoom in and you'll find two spots. click on one of them and either 10 dots will appear or a single dot. using these buttons, make the number of dots correspond with the placement numbers from the white clouds you found earlier. Example: If the number in the cloud on the left was 71, then it would be the 20th number, so you would want 20 dots to appear. using the button that makes 10 dots appear, click it twice. make sure you put the right numbers in the right clouds. when you're done, the ball will start to move in a pattern in the middle, revealing a wrench. wait for it to fall, then pick it up.
While facing the machine, use the wrench on the satellite thing. You have to do it a couple times, but eventually it will fall down. When it does, move to the right, using the red lens, find the four digit code on the satellite thing. its written upside down in the lower left corner of the screen. go back to the machine and punch in the code on the colored numbers. A gauge on the big machine will move and will be activated.
going back to the tree picture. use the lens to find the remaining numbers (you'll notice that the numbers you've already used are gone). find their placement in the chart, and go back to the big machine. this grid is basically the same one as from the link above. there are 11 boxes per row, click on the placement of the remaining numbers to highlight them green. when you've highlighted all of the right ones, another gauge will activate.
NOTE: at some point, a piece of paper will have been slid under the door, just push it back under, you don't need it yet.
go back to the oxygen tanks. using the wrench, remove the gauge from the right oxygen tank. take it from your inventory and put it on the left oxygen tank. attach the mask and hose to the gauge. then use the wrench again to remove the mask from the hose. attach the hose to the bottom of the big machine (there's a little yellow half circle thing at the bottom of the machine). turn the knob on the tank, then pull the lever on the machine. one of the gauges on the machine will move to show you've done it right.
paper dolls should have been slid under the door. click on them to slide them back.
red hexagons should start appearing on the walls. go back to the tree picture, click on it till it falls. zoom in on the puzzle behind the picture. click on all the symbols to light them up. zoom out. take the lens and hold it over the puzzle and let go. it will zoom in and reveal a key. take the key and use it on the door. the knob will fall out. you may have to wait a while and move about the room, but at some point, the dolls should have been slid back under the door, this time with blood on them. click on them, then use the key on the doll with the hole in it.
you're done.
the numbers on the light fixture are 5269 and you put them on the color grid
ReplyDeleteRenee, you're brilliant!
ReplyDelete#1: *slides paper under door* *hears odd sound*
#2: *Recieves paper, complains (odd sound), slides back under door)
#1: *Recieves paper* ...What the?
#1: *Cuts paper into paper dolls, slides under door* *hears odd sound again*
#2: *Frustrated, complains (odd sound again), slides back under door*
?!: *Somehow, paper dolls become torn and bloody...*
#1: *Recieves torn & Bloody dolls* I don't think I'm invited to leave... *Passes bloody dolls under door*
#2: *Sticks key into knob, just before recieving paper dolls again*
#1: *Sticks stylus into knob, knocking other side's knob out*
#2: *Complains again, sticks key into the hole in the paper dolls*
#1: *Pulls out paper dolls... they have the key in the hole?!* *Uses key...*
#2: *The latch is unlocking from the other side... The door slowly opens, a figure approaches* *Throws wrench into face of figure*
#1: *Suddenly struck with something painful, can't feel body. Everything turns red*
??: *Later, #1 is 'dead', on the stretcher. They do something with that... alien thing, and they go back in time, and are alive. They are now #2...*
Thanks strokend! I was starting to wonder if anyone else had seen that or if it was just me!
ReplyDeleteanyone here ??? I'm really struggling! I have put the numbers from the broken light into the numbered panels on the gauges and the second needle has moved now. i'm stuck!!!! argggghhhhh
ReplyDeletei have followed that walkthrough but when i attach the gauge, hose and mask to the left cylinder then take it off, it won't attach to the yellow thing under the machine........ have i missed something?
ReplyDeletenope. I'm out. yay! but what a weird end?? did anyone else jump out the window and die on a pointy rock???
ReplyDelete1.go right twice and click on the picture with the tree.write down the 4 numbers on the roots.
ReplyDelete2.find their square roots.(4=2,9=3,16=4,25=5,36=6...).back.
3.go left twice and click on coloured buttons.each square root matches to a colour.write colours down.back.
4.click the alien.click its feet until u get the previous colours.click its hand.
5.go right and click at the centre of the clock.click the 1st button.take the lens that the clock became.
6.put the lens on the picture with the tree and write down the numbers on the clouds.
7.go left twice.put lens on the board with the small squares.u ll see "2=1 and 3=2".that means that 2 is the 1st prime number and 3 is the 2nd prime number.(prime numbers are natural numbers that can be divided exaxtly only with itselves and 1.the first 15 prime numbers are 2,3,5,7,11,13,17,19,23,29,31,
37,41,43,47)
8)go right to the picture with the black dot.now u have to find to which prime numbers equals the numbers that u have noticed previously.(ex:71 equals to the 20th prime number).
9)put lens on the cloud.u ll see 2 red dots.if u click them, u ll see more dots.you have to create as many dots as the prime number u found previously.that means:if the cloud at the picture with the tree gave u no71,u must create 20 red dots at the same cloud at the picture with the black dot.u have to do it to the 3 clouds as well.
10.a wrench will appear on the picture and will fall down.pick it up.
11.go left once.click on the hose,between the oxygen bottles.take the hose with the oxygen mask.
12.use the wrench on the counter which is on the 2nd oxygen bottle.take the counter.now, put it on the 1st oxygene bottle.take the hose and put it on the counter.use the wrench on the oxygene mask and take it off.put the hose at the bottom of the green board.click on the bleed screw of the 1st oxygene bottle.pull down the red handle on the board.
13.go right once.use lens on the picture with the tree again.write down the remaining numbers.find to which prime number they equal to.
14.go left twice to the board with the small squares.click on the squares that equals to the previous prime numbers u found.u must have 6 green squares.
15.hit with the wrench a few times the light until it falls down.
16.go right once.put lens on the fallen light(on the brown side).now u are supposed to see 4 numbers on the light, but in my opinion they are too small.so i suggest u to click the button "printscreen" on your keyboard, while the lens is on the fallen light! paste the image somewhere and zoom until u ll see the 4 numbers!
17. go left once. click the 4 numbers on the coloured buttons.
18.pull down the red handle a few times.
19.go right twice.there is a piece of paper under the door.take it.
20.click on the picture with the tree until it falls down.click on the exagon.click on the 5 symbols.they ll become yellow.back.put lens on the exagon.take the key.put the key on the keyhole.go around the room and return to the door.take the piece of paper.put the key in the hole of the paper.
21.the end!
connect the mask to the oxygen tank. While it's connected, use the wrench to seperate the oxygen mask from the tube.
ReplyDeleteHi
ReplyDeleteHi, is annyone playing right now?
ReplyDeleteThe clock and the pictures have something to do with that prime numbers thing that showed up after the allien
ReplyDeleteIf you put the lens where the clock used to be there is a little devil on the wall.And if you press tab the devil will also show up but dont press it cuz i think well have to start over
ReplyDeleteto hard for me lol .. :D I come back when there's a walktrough for me ..
ReplyDeleteOH my God! IF you hadn't noticed! If you put the clock that turned into the len, use it on the place where the clock was and you'll see a devil or sth similar... This case I'm telling you, if it isn't YET happened to you guys, it just happened to me! I turned around a few time to find some clues, SUDDENLY, when I turned to the direction that has the gas tank and the machine with colored numbers, THAT demon showed in front of my laptop and started BLINKING, when I mean the blinking, the lap's screen was blinking.. IN RED COLOR... then everything is back to normal... I was so scared! I hope there's no dead scene after I trun around for a few more times.... YAY :o!!!!!!
ReplyDeleteHere is what I've got so far with the items:
ReplyDelete1. Clock Len
2. Oxygen Mask
3. Wrench
4. ... ( I really know don't how to say it in English but it's attached to the gas tank, it has a circle thing. And you can use the wrench to take that circular thing out and attach to the 2nd and it can reattach to its original tank )
And so far here is what I've done:
I realize sth... so I used the wrench to separate the mask off the oxygen mask so now it's a wire and it can link from the tank to the control panel. The plug-in to the control panel is in the bottom, you'll see the half circle under the control panel that I first thought it was gum sticking under it, but it wasn't. And the grid with lots of buttons, I clicked it and it turned green... but I don't know the combination or whatever that had to do with the grid buttons. And that's all I got so far. Anyone made any better progress?
I've finished the game... and ummm. What an ending! I think I can understand this in my way. If you play Episode 1 you would realize something... In Ep 1, you trapped in a bedroom as I seen it like that, after a few event, you found out that when you push the sheet through the door hole under the floor, the sheet went back to ya. In Ep 2 at the near ending when you managed to fill up one guage, the paper as you seen it appeared under the door, and you just simply push the paper back and saying stop playing with your head. And then after you finished all 3 guages, you pulled the lever, and showed up the last puzzle of your life, then that sheet came to you again under the door, was cut into cute shape, and maybe you were so crazy now.. you used a red marker or blood since I don't see any marker and drew the sheet and turned into something scary and bloody and torned offthe heads, 2 heads for detail, then you pushed it in again! After you have the key without even a REAL explaination, you started to terrified, you turned around a bit, then you turned back to the door, and the bloody sheet returned to ya, then you put the key into the hole of the paper without a good reason. In Ep 1, when you put the bloody sheet under the door, you said you don't care about the key anymore, but then the key is there for you in the sheet's hole by you in Ep 2. Then when you opened the door, redness flooded your sceen and you said your head was hit hard, that is because in Ep 2, when the door was opened by you in Ep 1, you thought it was the guy who did to you who is actually you in Ep 1, so you threw the wrench right into yourself in the face... then you in Ep 2 couldn't take anymore and then just jumped off the window and suicide??~!?? Hmmmm, maybe Ep 2 was not about the main character but it was about... someone else??????? Maybe in Ep 3 if there is one in the future, you will wake up with the blood bleeding out from the wrench shaped in your face and said: WHAT THE F$%$? I'm still ALIVE!??! After that jump I/m STILL here?!?!?!? Hmmmmmmm... Or maybe he was drugged to powerful that he imagined it all out and jumped out of the window????? Well that's what I think. What do you guys think??? Let me know~!
ReplyDeleteYou can post your comments to share your opinion about games, share your hints to help other players or ask help from them. If you can't sign in with your Google account, when you try to post your comment, you have to allow cookies on your browser for this website.
EmojiYou can also check recent comments to help other players, if they need help about games.